A Retrofit 60-Hz Current Sensor for Non-Intrusive Power Monitoring at the Circuit Breaker

Technology #13930

Questions about this technology? Ask a Technology Manager

Download Printable PDF

Image Gallery
Non-Intrusive Power Monitoring at the Circuit BreakerNon-Intrusive Power Monitoring at the Circuit Breaker
Categories
Inventors
Professor Steven Leeb
Department of Electric Engineering and Computer Science, MIT
External Link (meche.mit.edu)
John Cooley
Department of Electric Engineering and Computer Science, MIT
Al-Thaddeus Avestruz
Department of Electric Engineering and Computer Science, MIT
Zachary Clifford
Department of Electric Engineering and Computer Science, MIT
Managed By
Christopher Noble
MIT Technology Licensing Officer - Clean and Renewable Energy
Patent Protection

Non-intrusive monitoring of power and other parameters

US Patent 8,344,724

Non-intrusive monitoring of power and other parameters

US Patent 8,907,664
Publications
Energy Accountability Using Non-Intrusive Load Monitoring
IEEE Sensors Journal, Vol. 14, No. 6, June 2014, pp.1923-1931

Applications

This device enables Non-Intrusive Load Monitoring technology to allow fine-grained power monitoring in new settings. This technology can be applied to various power distribution systems and legacy. 

Problem Addressed

Current wrap-around magnetic field sensors are impractical for some retrofit applications and are further constrained by specific safety regulations related to electrical devices. The technology presented is an alternative to the wrap-around magnetic field sensor. It measures the current in the utility feed by sensing the resulting magnetic field at the face of the main circuit breaker in a standard breaker panel, where the Line and Neutral are already separated. These devices function with enough signal to noise ratio to provide time and frequency domain reconstructions of the current in the main circuit breaker. A major challenge that is overcome by the system presented here is that of communication through the steel breaker panel door, which must be closed to comply with safety regulations. 

Technology

The invention provides a new sensor for non-intrusive power monitoring that measures current flow in a circuit breaker without modifying the breaker panel or the circuit breaker itself. The sensor consists of three main parts: an inductive pickup for sensing current from the breaker face, an inductive link designed to transmit power through the steel breaker panel door, and a passive balanced Junction Gate Field-Effect Transistor (JFET) modulator circuit for transmitting information through the inductive link. The novel JFET does not require a DC power rail to mix the incoming carrier with the 60 Hz current signal sensed from the breaker. The sensor may be interfaced with a spectral envelope load detection system so it can monitor multiple loads from a central location. Non-Intrusive Load Monitoring (NILM) is an approach with a much lower sensor count than other device-specific monitoring systems. A NILM system identifies and monitors individual loads on a power distribution system by measuring the frequency content of transient events in the current signals from a centralized location. 

Advantages:

  • Versatile
  • Low cost
  • Non-destructive