Planar Mixed-Metal Perovskite Photovoltaics

Technology #17938

Questions about this technology? Ask a Technology Manager

Download Printable PDF

Categories
Inventors
Professor Paula Hammond
Department of Chemical Engineering, MIT
External Link (hammondlab.mit.edu)
Professor Angela Belcher
Department of Biological Engineering, MIT
External Link (belcherlab.mit.edu)
Matthew Klug
Department of Biological Engineering, MIT
Managed By
Christopher Noble
MIT Technology Licensing Officer - Clean and Renewable Energy
Patent Protection

Planar Mixed-Metal Perovskite Photovoltaics

PCT Patent Application WO 2017-031373

Planar Mixed-Metal Perovskite for Optoelectronic Applications

US Patent Pending 2017-0053746

Applications

This technology is designed for photovoltaic devices, but could be generalized to other optoelectronic devices such as light-emitting devices, photodetectors, or lasers.

Problem Addressed

Perovskite devices have increased their efficiency from 6.5% to 20.1%. However, there are two central issues with commercialization of perovskite solar cells, the toxicity, and the long-term stability of the lead-based materials. This design simultaneously mitigates the toxicity and instability of the perovskite materials by introducing a second less-toxic metal species into the perovskite film.

Technology

By replacing small, but significant, amounts of the lead content with a second metal species, it was estimated that the perovskite lattice might be tolerant of the extrinsic species and that the excellent electronic properties of the lead-based perovskite might be perturbed but not completely disrupted, allowing for efficient or even improved photovoltaic performance. The extrinsic species were cations including, but not limited to, cobalt ions, copper ions, and iron ions. The net result of improvements to these individual performance parameters is often an increase in the overall power conversion efficiencies of a mixed-metal device over the pure-lead (Pb) system. A mixed cobalt (Co) device where 1/32nd of the Pb content is replaced with Co achieved a measured efficiency of 11.1%, the highest measured for any planar mixed-metal perovskite solar cell.

Advantages

  • Decreases toxicity of perovskite photovoltaics
  • Increases stability of perovskite photovoltaics